|
PRODUCTS
Machine Range
|
|
|
|
|
|
|
cutter-block
The sturdy Hammer cutter-block assembly, with quick change, self setting planer knife system.
|
|
|
3-knife quick-change self-setting cutterblock system
The 3 knife quick-change, self-setting cutterblock system enables simple and accurate planer knife changes in seconds.
|
|
|
Tiltable planer fence
For planing and bevelling work the planer fence is tiltable from 90°–45°. The long planer fence profile allows accurate guiding of the work-piece.
|
|
|
Depth of cut
The surface planer has a 4 mm depth of cut.
|
|
|
Adjust the thicknessing height
The maximum thicknessing height of 225 mm permits the processing of large and heavy workpieces. If desired, the optional digital handwheel can be used to adjust the height of the thicknessing table with an accuracy of 1/10 of a millimeter.
|
|
|
Thickness planing width
Thicknessing width up to 306 mm (A3 31, C3 31, C3 31 perform), Thicknessing width up to 406 mm (A3 41)
|
|
|
Full-length fence edge for parallel cuts
Perfect, continuous guiding of the rip fence for parallel cuts with your C3 31 combination machine.
|
|
|
Electrically-Driven Scoring Unit
The scoring blade can be easily adjusted vertically and laterally for perfect alignment with the main sawblade. An independent 1.0 HP motor drives the scoring blade
|
|
|
to use a grooving cutter “Dado cutter”
It is also possible to use a grooving cutter “Dado cutter” with your HAMMER sliding table saw. Especially developed by HAMMER, the cutter simply melts wood away. Massive in size and performance enabling cuts up to 19.5 mm.
|
|
|
Accurate slot and dowel drilling work.
|
|
|
The Format Sliding Table
The perform models are equipped with a large, heavy-duty format sliding table that will withstand heavier loads. The smooth and precise guiding system guarantees accurate cross, mitre and format cuts.
|
|
|
Outrigger Table
with integrated work piece roller and large telescopic crosscut fence, it enables you to expertly carry out panel cuts, trimmings and crosscuts of large dimensions.
|
|
|
The spindle moulder
will take spindle moulder tooling with a diameter of up to Ø 220 mm. A fine adjustor on the outfeed fence reduces set up time and improves accuracy.
|
|
|
|
